Ubuntu.Components.SlotsLayout

The SlotsLayout component provides an easy way to layout a list of user-interface elements horizontally following Ubuntu design standards. We call the elements which we want to layout "slots". Slots is just another name for SlotsLayout's visual children. More...

Import Statement: import Ubuntu.Components 1.3
Since: Ubuntu.Components 1.3
Inherits:

Item

Inherited By:

ListItemLayout.

Properties

Attached Properties

Detailed Description

SlotsLayout will layout its children according to Ubuntu's visual design rules, providing automatic spacing and positioning (both horizontal and vertical, unless overrideVerticalPositioning is set) for each of them.

If you're building list items, we recommend to use ListItemLayout, as it is designed to accomodate up to 3 labels that follow our UI standards.

There are three conceptual types of slots:

  • The leading slots, which are the ones positioned at the beginning of the layout (i.e. they are the leftmost elements in left-to-right locales).
  • The trailing slots, which are positioned after mainSlot, if any, or after the leading slots otherwise.
  • The main slot, which drives the positioning of the vertical dimension of each slot as described in section Automatic vertical positioning of slots. This slot sits between leading and trailing slots, and can be set using the property mainSlot.

In order to comply with Ubuntu design standards, this component hosts a maximum of 1 leading and 2 trailing slots. The layout algorithm will ignore any additional item.

SlotsLayout also provides a series of properties which are attached to each slot. However not all properties are valid in all the circumstances. These properties allow an easy tweaking of slot's positioning within the layout. SlotsLayout::position can be used to set whether a slot should be a leading or trailing one. SlotsLayout::padding can be used to tweak the padding around a slot. SlotsLayout::overrideVerticalPositioning allows to disable the automatic positioning of the vertical coordinate of a slot as described in Automatic vertical positioning of slots, in case a custom behaviour is needed.

The following example shows a very simple SlotsLayout with an Icon as leading slot, and a CheckBox as trailing slot. There is no need to specify any size or margin, everything is handled automatically by the layout component.

SlotsLayout {
mainSlot: Label {
text: "Hello developers!"
}
CheckBox { SlotsLayout.position: SlotsLayout.Trailing }
Icon {
name: "message"
SlotsLayout.position: SlotsLayout.Leading;
width: units.gu(2)
}
}

The positioning of each slot should only be tweaked using its attached properties. Just like when using http://doc.qt.io/qt-5/qtquick-qmlmodule.html">QtQuick's Row, a child item within the layout should not set its x or anchors affecting the horizontal positioning (left, right, horizontalCenter, centerIn, fill). If you need to perform these actions, consider positioning the items without the use of a SlotsLayout.

The vertical anchors of a slot can be modified, provided that SlotsLayout::overrideVerticalPositioning for that slot is set. More about this in the Advanced layout tweaks section.

Resizing the layout

SlotsLayout's implicit width is by default set to the width of the parent (usually a ListItem). Changing the width of the layout is possible but should not be needed in most of the usecases: keeping the width in sync with the width of its parent allows the user interface to be scalable across devices with varying resolution and form factors.

The implicit height is not fixed either. In order not to clip any of the slots, the SlotsLayout adapts to accomodate its highest slot with padding and the padding around the layout.

Because of the above, it is recommended to have items wrapping the layout bind to SlotsLayout's height (adding ListItem divider's height if needed), not the opposite. It is not recommended, for instance, to use anchors.fill to force SlotsLayout to fill another Item, because that item might not have enough space to accomdate all the slots, and therefore the slots will be clipped.

ListItem {
//CORRECT
height: layout.height + (divider.visible ? divider.height : 0)
SlotsLayout {
id: layout
//WRONG
//anchors.fill: parent
mainSlot: Label {
text: "Hello developers!"
}
CheckBox { SlotsLayout.position: SlotsLayout.Trailing }
}
}

Manually resizing SlotsLayout (or ListItemLayout) is usually not needed and we recommend to avoid it, as the component will already take care of doing the job for you. The following example shows what a standard SlotsLayout should look like:

SlotsLayout {
mainSlot: Label {
text: "Hello developers!"
}
//just an example of something inside SlotsLayout
CheckBox { SlotsLayout.position: SlotsLayout.Trailing }
}

Automatic vertical positioning of slots

In order to provide a visually pleasing and consistent layout across the whole platform, SlotsLayout automatically handles the vertical positioning of its slots so that they comply with the following rules:

  • if there's any slot which is taller or as tall as mainSlot or if no mainSlot is defined, all slots will be vertically centered within the layout (still taking SlotsLayout::padding.top and SlotsLayout::padding.bottom into account).

    src="https://assets.ubuntu.com/v1/d6f6cdc0-SlotsLayout_centerVertically.png" alt="" />

  • Otherwise, all the slots (including mainSlot) will be aligned to the top of the layout with a padding of SlotsLayout::padding.top plus the top padding of the slot, defined in its attached properties.

    src="https://assets.ubuntu.com/v1/0b62902d-SlotsLayout_alignToTop.png" alt="" />

Even though it is not recommended, it is still possible to override this behaviour on a slot-by-slot basis by setting SlotsLayout::overrideVerticalPositioning to true. This is described in Advanced layout tweaks.

Input handling

The purpose of SlotsLayout is to position its slots following the rules defined in Automatic vertical positioning of slots. There are two recommended ways to implement input handling: the first one, in case the target is to create a list item, is to put the SlotsLayout (or any derived component, like ListItemLayout) inside a ListItem, and use ListItem's onClicked handler to handle clicks and taps.

ListItem {
height: layout.height + (divider.visible ? divider.height : 0)
onClicked: console.log("clicked!")
SlotsLayout {
id: layout
mainSlot: Label {
text: "Hello developers!"
}
//just an example of something inside SlotsLayout
CheckBox { SlotsLayout.position: SlotsLayout.Trailing }
}
}

The second option is to use a MouseArea as a wrapper around SlotsLayout, as the following code demonstrates:

MouseArea {
anchors.left: parent.left
anchors.right: parent.right
height: layout.height
onClicked: console.log("clicked!")
SlotsLayout {
id: layout
mainSlot: Label {
text: "Hello developers!"
}
//just an example of something inside SlotsLayout
CheckBox { SlotsLayout.position: SlotsLayout.Trailing }
}
}

Note: as recommended in Resizing the layout, since SlotsLayout has a dynamic height, it is important to have the parent item's height (in this case MouseArea) follow SlotsLayout's height, and not the opposite, to avoid getting the slots clipped out of the layout.

Advanced layout tweaks

The automatic layout provided by SlotsLayout is designed to cover most of the usecases. There could be times, however, where you might want to tweak the positioning of one particular slot.

A slot can set its attached properties SlotsLayout::padding and SlotsLayout::overrideVerticalPositioning to reach the desired position.

When a slot enables SlotsLayout::overrideVerticalPositioning, it gains control over its vertical anchors (top, bottom, verticalCenter). Moreover, SlotsLayout will ignore the height of that slot in the following computations of its implicitHeight (see Resizing the layout).

When manually positioning a slot, care must be taken to avoid pushing the slot outside of the layout perimeter, to avoid getting it clipped.

The following example shows a SlotsLayout which has both custom padding and a slot which uses custom vertical positioning:

SlotsLayout {
id: layout
mainSlot: Label { id: label; text: "Hello developers!" }
padding {
top: units.gu(3)
bottom: units.gu(3)
}
CheckBox {
anchors.top: label.top
SlotsLayout.position: SlotsLayout.Trailing
SlotsLayout.overrideVerticalPositioning: true
}
}

It is also possible to sort the slots in a relative fashion, by using positions such as SlotsLayout.Leading+1, for instance, if we want that slot to always be positioned after items with position SlotsLayout.Leading. This is particularly useful, for example, when subclassing SlotsLayout-based components which already have predefined slots inside them. If, for instance, the component we're subclassing has a slot with position SlotsLayout.Trailing, we can add a slot to our subclass with position SlotsLayout.Trailing-1 if we want to make sure our slot is always positioned before the one in the component we are deriving from. This scenario is shown in the following example code:

//ExampleLayout.qml
SlotsLayout {
id: layout
mainSlot: Label { id: label; text: "Hello developers!" }
CheckBox { SlotsLayout.position: SlotsLayout.Trailing }
}
//DerivedLayout.qml
ExampleLayout {
id: derivedLayout
Icon {
id: newSlot
width: units.gu(2)
name: "message"
SlotsLayout.position: SlotsLayout.Trailing - 1
}
}

See also ListItemLayout.

Property Documentation

mainSlot : Item

This property represents the main slot of the layout. By default, SlotsLayout has no mainSlot set.

The main slot is the one that defines the vertical positioning of the other slots. Because of this, changing its position and overrideVerticalPositioning attached properties has no effect. More details can be found in the section Automatic vertical positioning of slots.

Note: because of limitations in http://doc.qt.io/qt-5/qtquick-qmlmodule.html">QtQuick/QML, it is not possible to initialize mainSlot's attached properties. Setting mainSlot's attached properties has to be done via JS, for example inside Component.onCompleted, as shown in the following example:

SlotsLayout {
id: layout
Component.onCompleted: {
mainSlot.SlotsLayout.padding.leading =
Qt.binding(function() { return units.gu(5) })
}
mainSlot: Label { id: label; text: "Hello developers!" }
CheckBox {
anchors.top: label.top
SlotsLayout.position: SlotsLayout.Trailing
SlotsLayout.overrideVerticalPositioning: true
}
}

padding group

padding.top : real

padding.bottom : real

padding.leading : real

padding.trailing : real

This property defines the padding around the bounding box which holds all the slots. The default value for padding.leading is 1 Grid Unit. The default value for padding.trailing is 1 Grid Unit.

The value of padding.top and padding.bottom depends on the size of the slots which are in the layout:

  • if, according to the rules defined in Automatic vertical positioning of slots, the slots are supposed to align to the top of the layout, padding.top and padding.bottom will have a value of 2 Grid Units.
  • otherwise, if according to the rules defined in Automatic vertical positioning of slots the slots are supposed to be vertically centered in the layout, and the tallest slot (mainSlot excluded) has a height of at least 4 Grid Units, padding.top and padding.bottom will be set to 1 Grid Unit.

Note: the automatic handling of padding.top and padding.bottom is disabled once either padding.top or padding.bottom is set to a custom value.


Attached Property Documentation

SlotsLayout.overrideVerticalPositioning : bool

This attached property holds whether the layout should automatically handle the vertical positioning of a slot. It is attached to every slot. The default value is false.

If this property is set to true, the layout will ignore the corresponding slot during the computation of the implicitHeight of the whole layout (see Resizing the layout) and will not modify its vertical position during the layout process. As a consequence, it is possible, in that case, to manually set the vertical anchors of that slot (verticalCenter, top, bottom) or even its y property.

Care must be taken to avoid getting the slot clipped by positioning it partly or completely outside of the SlotsLayout that holds it.

Note: changing the value of overrideVerticalPositioning of one slot after the layout has already been initialized will reset its top, bottom, verticalCenter, fill, centerIn anchors for that slot, and the corresponding margins. Care must be taken to set the anchors to the desired values only after setting overrideVerticalPositioning.

Note: this property is only valid for standard slots. Changing the value of mainSlot's overrideVerticalPositioning has no effect.


SlotsLayout.padding : QtObject

While SlotsLayout's padding property defines the padding around the whole layout, this attached property defines the padding around the slot it is attached to.

It is a grouped property that exposes the properties padding.top, padding.bottom, padding.leading, padding.trailing.

The default value for SlotsLayout.padding.top is 0. The default value for SlotsLayout.padding.bottom is 0. The default value for SlotsLayout.padding.leading is 1 Grid Unit. The default value for SlotsLayout.padding.trailing is 1 Grid Unit.

Please note that top and bottom paddings are only used when SlotsLayout::overrideVerticalPositioning is set to false. More about this in Automatic vertical positioning of slots.


SlotsLayout.position : enumeration

This attached property defines the relative position of the slot inside the layout. It is attached to each slot. The default value is SlotsLayout.Trailing.

Valid values for position are:

  • SlotsLayout.First: the slot will be positioned at the beginning of the layout
  • SlotsLayout.Leading: the slot will be positioned in the leading slots
  • SlotsLayout.Trailing: the slot will be positioned in the trailing slots, i.e. the one towards the end of the layout.
  • SlotsLayout.Last: the slot will be positioned at the end of the layout.

ProgressionSlot, for instance, has its position set to SlotsLayout.Last, in order to make sure the chevron is always displayed as the last trailing slot.

Whenever there are more slots with the same SlotsLayout::position, they will be positioned following the order in which they were added to the layout.

It is also possible to define relative positioning between the slots, by using values such as SlotsLayout.Leading+1, or SlotsLayout.Trailing-3. More about this in Advanced layout tweaks.

Note: you can only change the position of standard slots. Changing the position of mainSlot has no effect.