UC20 is currently under active development.See below for images.
Ubuntu Core 20 (UC20) is built on the foundations of Ubuntu 20.04 LTS (Focal Fossa). It's the next generation of Ubuntu for embedded devices.
New features for this release include:
- Full-disk encryption via TPM integration currently x86 only with ARM to follow. beta1 TPM integration works with existing CA
- Recovery mode menu and chooser
- A new recovery and reinstall mode
- Initial MAAS & cloud-init support
- Raspberry Pi support (both ARMv7 and ARM v8)
Download the latest UC20 images from: http://cdimage.ubuntu.com/ubuntu-core/20/beta/current/
To access the recovery chooser, reset or start up UC20 while holding the
1 key needs to be held until the initial boot process completes, after
which you'll be presented first with the system selection menu followed by the
following recovery options:
- Run normally: Continue with the boot process.
- Recover: reboot into recovery mode and log into the system using prior credentials to recover your data, either via SSH or locally after setting up a password for the user.
- Reinstall: initialise the device from the listed system version image. All existing user data on the device will be removed.
The model definition has been expanded for UC20 devices to include several new options, most notably grade and snaps (see Custom images for details on building images).
Sets the constraints for the device. It can be one of the following:
dangerous: relax some of the constraints here (mandatory snap id for example), and should allow for the use of unasserted snaps, devmode snaps, or the presence of extra snaps in the recovery system.
signed(default): no unasserted (unsigned) snaps or snaps not mentioned in the model can appear or be used in the recovery system.
secured: same properties as signed plus it is mandatory for the device to use full disk encryption and secure boot.
A new header to control which snaps comprise the device setup. It consists of the following keywords and mappings:
name(mandatory): name of the snap. Cross-checked at image build time but ignored later
id(mandatory): snap-id, needs to be either:
base|gadget|kernel|app|core. app is the default
modes(optional): a list with UC20 modes (verbs, "run") or mode aliases ("ephemeral", covers all recovery/tmpfs modes) for which the snap needs to be installed. Default is [run], should not be used for types
kernel|gadgetand for the snap indicated by the "base" header
presence(optional): set to mark a snap whose absence will not fail installation or recovery. Can be optional or required of which required is the default
default-channel(optional): initial tracking channel for the snap, default is "latest/stable"
The appearance of the snaps keyword prohibits the use of gadget, kernel and required-snaps as the same information and more is conveyed through the snaps header.
The following is an example model definition for amd64:
type: model authority-id: canonical series: 16 brand-id: canonical model: ubuntu-core-20-amd64-beta architecture: amd64 base: core20 grade: signed snaps: - default-channel: 20/beta id: UqFziVZDHLSyO3TqSWgNBoAdHbLI4dAH name: pc type: gadget - default-channel: 20/beta id: pYVQrBcKmBa0mZ4CCN7ExT6jH8rY1hza name: pc-kernel type: kernel - default-channel: latest/beta id: DLqre5XGLbDqg9jPtiAhRRjDuPVa5X1q name: core20 type: base - default-channel: latest/beta id: PMrrV4ml8uWuEUDBT8dSGnKUYbevVhc4 name: snapd type: snapd timestamp: 2020-01-13T15:47:00.0Z sign-key-sha3-384:
The easiest way to test the latest UC20 release is to download the latest image and either write the image to a USB storage device, and test the build on real hardware, or use the image with a virtual machine.
If your hardware supports TPM, and has UEFI Secure Boot enabled, UC20 will use these to deploy a fully encrypted system. When redeploying to the same device, the TPM will need to be cleared.
To test UC20 with QEMU (https://www.qemu.org/), first install the
OVMF package (eg.
sudo apt install ovmf)
then run the following command to boot a UC20 image (renamed pc.img) within a
sudo qemu-system-x86_64 -smp 2 -m 2048 \ -net nic,model=virtio -net user,hostfwd=tcp::8022-:22 \ -drive file=/usr/share/OVMF/OVMF_CODE.fd,if=pflash,format=raw,unit=0,readonly=on \ -drive file=pc.img,cache=none,format=raw,id=disk1,if=none \ -device virtio-blk-pci,drive=disk1,bootindex=1 -machine accel=kvm
With a successful boot, Ubuntu Core initialisation will ask for both networking parameters and an Ubuntu One account (see https://snapcraft.io/account).
When the initialisation process has finished, and rebooted, you can SSH to the device using either the physical device network address, or localhost port 8022 for the above QEMU example command:
$ ssh <username>@localhost -p 8022